|
| |
Truck mounted self propelled Bitumen Pressure Distributor with suitable heating system and variable spray bar to operate on constant pressure system, complete with air-compressor, bitumen pump, auxiliary engine, tank mounting and other accessories for uniform and constant rate applications of hot bitumen (or cold tar) as per the specifications indicated below.
| Bitumen Tank |
| Capacity |
: |
4000 / 5000 / 6000 / 8000 litres |
| Thickness of shell |
: |
4 mm. |
| Shape |
: |
Rectangular / Oval shape with light resin bonded rock wool insulation 50 mm. thick. |
| Manhole |
: |
600 mm. dia. |
| Filter |
: |
Removable screen filter. |
| Filling of Tank |
: |
(i) Through manhole. (ii) Through self-priming by own pump. |
| Temperature |
: |
Dial type thermometer of range 0° to 250° (minimum). |
| Tank Contents
Measurement |
: |
With calibrated dipstick |
|
| Power Pack |
| Engine |
: |
4 - Stroke twin cylinder air / water cooled diesel engine of 25 hp at 2000 RPM. |
| Bitumen Pump |
: |
Shuttle Block Type 380 to 450 litres per minute. |
| Compressor |
: |
Double cylinder 3 HP. Pressure 9 Kg./sq. cm. maximum. Capacity 360 litres. |
|
| Heating |
| Type of Burner |
: |
Single high pressure oil burner for adequate heating of viscous binder, oil consumption 20 lt/hr. |
| Tank Capacity |
: |
50 litres. |
| Fire Tube |
: |
230 mm. dia. |
|
| Spray Bar |
| Type |
: |
Folding type fitted with pressure gauge, regulating valve etc. |
| Width |
: |
Variable width from 2.4 to 4.2 metres by extension bar. |
| Width Adjustment |
: |
By closing of nozzles. |
| Adjustment of height |
: |
Mechanical. |
| Pre-heating of spray bar |
: |
By full circulation of preheated bitumen. |
| Distance of nozzles |
: |
225 mm. |
| Spraying pressure |
: |
To be adjusted between 0-6 bars. |
| Hand lances |
: |
2 Nos |
| Cleaning |
: |
By air pressure or diesel oil. |
| Rate of application |
: |
0.3 to 1.0 Kg. / sq.m. Calibration chart will be provided inside the driver's cabin and at the operator's platform. |
|
 |
| Operation |
|
| The operation of the spray bar is from operator's platform at the rear. |
|
| Truck |
|
| TATA 1613 SE Truck Chassis of WB-4225 mm. and 4x2 configuration or equivalent. The driver's cabin will be built as per R.T.O. requirement. The battery used for starting the diesel engine conforms to ISI. |
|
| ISI Specifications |
|
| All the bought-out components conform to relevant ISI specifications and are of reputed make. |
|
| Optional |
|
| Trolley mounted in place of Truck mounted. |
|
|
